A clockwork orange: chapter One Essay

One gets an initial impression of Alex and his friends from the first page: Alex says, â€Å"There was me†¦ and my three droogs†. Immediately this suggests that he and his friends are close, like a gang, and this leads on to the idea of conflict. The closeness of Alex and his friends is elaborated upon throughout the chapter. He frequently uses the phrase â€Å"The four of us† and, when speaking to Pete, Georgie and Dim, he says, â€Å"Oh my brothers†. Their close camaraderie is summed up on page six, where Alex describes it as being â€Å"usually one for all and all for one†. Then he begins to describe three â€Å"devotchkas†, whom one presumes to be members of a rival gang (the reader is told that Alex and his friends are â€Å"malchicks†). There is no brevity in Alex’s description, and he goes into detail when describing the clothes and make-up. It is likely here that Alex has a certain respect for these gang members, indicated by his lengthy description of their bright uniforms, and by the fact that he speculates on the large cost of these uniforms. But there is also a clear element of mockery. This is especially apparent in the sentence â€Å"These were supposed to be†¦ â€Å", with an emphasis on the word â€Å"suppose†. He is putting the credulity of the gang into doubt, debunking their claims. This is quite childish in some respects, and reminds the reader of his tender age. Alex and his â€Å"droogs† also wear uniforms, and Burgess describes them in a way that makes them unique to those four – by telling the reader what design each of the four had for their â€Å"jelly mould†, he is putting them apart from the rest of the world, giving them a uniqueness and style that no one else possesses. The uniforms are also a barrier between them and the rest of the world. This is also true of the â€Å"maskies† that the four often wear. As well as the more practical use of hiding their face from recognition, the masks separate the boys from the rest of society, making them stand out, and perhaps feel superior. Also, the outrageous costumes, to choose a better word, are a clear symbol of rebellion. It is ironic, therefore, that the boys wear them, as uniforms have always been associated with conformity. The language of the boys is the most successful at suggesting conflict with the outside. To begin with, the words are very harsh. Hard sounds, especially obvious with the many Ks, make the words infinitely more savage. The language used to describe other people is degrading: old women are â€Å"ptitsas† and men are â€Å"vecks†. The boys do not use this language when speaking to people who are not involved in gang warfare. To the man coming out of the library, Alex is polite and uses mostly understandable language. It is obviously because he is mocking the man, but it is also possibly because he would not understand (since it seems that he speaks normally). So this is their language, something they use to each other. This is a straightforward example of their conflict with the â€Å"outside†. But the language not only acts as a barrier between the four boys and the older members of society: it also acts as a barrier between the boys and the readers. For anyone starting the book for the first time, the words used are baffling, and it takes a lot of getting used to. What is more, Alex feels the need to explain what some of the words mean: â€Å"†¦ a rooker (a hand, that is)†. It is at this point that the readers become, in effect, a part of the society that Alex is rebelling against. We are on the outside. Finally, the language is used in such an extraordinary way, that it alienates us even further. It is in some instances quite chilling. Words like â€Å"poogly† are very childish; the best example is â€Å"appy polly loggies†, which is some corrupted baby version of the word â€Å"apologies†. It contrasts the stark violence of the book, giving it an even more savage tone. It is a strange mixture for Alex to use, reminding the reader that he is young. Plus, not only does it make the reader aware of the conflict Alex has with society, but also the deep struggle that is going on in Alex’s mind. 1. What impressions are we given of the society and the environment presented in chapter one? Use examples. (10 marks) The first impression one gets when reading about Alex’s world is what an absolutely seedy place it must be. The â€Å"Korova Milkbar† sounds very entertaining but rather run down, and one is informed that it is one of many â€Å"mestos†. Obviously it sells milk, but reading further on, one is told that this milk is â€Å"plus something else†, that something else being hallucinogenic drugs of some sort. It is then that one gets an idea of the depravity of the society in which Alex lives. Alex then mentions what he and his friends do to obtain money: either they can beat someone up in an alley and empty his pockets, or they can â€Å"do the ultra violent† on an elderly woman in a shop and steal the money from the till. One realises that, fairly obviously, something has gone wrong with the world in Alex’s time. Various violent and criminal topics follow, such as gang warfare and the description of a drug-induced â€Å"high†. It paints a morbid picture of a world in which violence reigns supreme, where there are no rules any more and society has disintegrated. This is backed up by the fact that any kind of law enforcement is not mentioned until later in the chapter. These â€Å"millicents† are obviously not important and Alex and his friends can easily outsmart them. So, in effect, there is no law enforcement. Early on, the only indication that some sort of legal system exists is the fact that â€Å"mestos† were not licensed to sell liquor (which does not seem to stop them any way). Another aspect of society that is not missing, but seems unpopular, is that of literature. Alex reports that â€Å"newspapers {are not} read much† – whether this is because of illiteracy or just lack of interest, one is unsure. The Public Biblio, which is the derelict-sounding municipal library, was something that â€Å"not many lewdies used those days†. Again, the reason why is not clear. Owing to the other â€Å"past-times† of the day, namely ultra-violent criminal activities, it is likely that nobody is interested in literature any more. This certainly fits in with the way in which Alex and his friends persecute a man just because they saw him coming out of the library with books in his hand. However, there are references to institutions that seem very active in the Alex’s world. The first is the health service. A â€Å"rozz† informs the gang that there have been â€Å"two hospitalizations†. The fact that the hospitals in Alex’s world are busy is blatantly obvious, due to the height of criminal activity. One is unsure of how efficient these hospitals are. In a State-run society such as this, one would imagine they were very inefficient indeed. The other institution that is still up and running is school. Alex himself tells us that he must go to school the following morning, and we later learn that this is a corrective school. Overall, the world in Alex’s day seems extremely bleak. Wherever Alex is, it is clearly a police state, where individual rights and freedoms do not stand for much. The older, and in some ways, unnecessary institutions, such as the library system and newspapers, seem to have lost appeal completely, presumably replaced by â€Å"worldcasts† and â€Å"Milkbars†. It does not sound like somewhere anybody would actually want to live.

HCS

How to control: Several engineering measures and work practices are recommended to control ergonomic hazards during garment transfer, pressing and bagging activities. Include modifying equipment, making changes in work practices and purchasing new tools or other devices to assist in the production process. By making these changes, it has reduced physical demands, and eliminated unnecessary movements and lowered injuries. Personal protective equipment: Watch what's happening around you, don't work in confined spaces, have good posture and don't be lazy.Use all the safety requirements when using heavy or dangerous equipment. Physical Hazards How to control: Some strategies to controlling a physical hazard includes. Effective detection and elimination systems. Effective facility maintenance. On-line visual inspection, Detection methods include metal detectors, x-ray machines, optical systems. Good manufacturing practices, End product screening etc. PEE: Wear your hard hats, use all the WHAMS symbols too help you. All your basic safety equipment; gloves, glasses, etc. Psychosocial How to control: Don't work with heavy or dangerous material when you are stressed, over tired or under the influence of drugs and alcohol. Personal protective equipment: Put signs to help you such as † Any form of abuse will not be tolerated her†. Stress relieving activities such as massages, face masks, or even try changing your diet. Chemical Hazards How to control: Remove the hazard from the work place. Control any injuries in a way that is necessary. Such as eyes, if you get chemicals in your eyes there are equipment to wash out your eyes as fast as possible.Personal protective equipment: Equipment worn by individuals to reduce exposure such as contact with chemicals or exposure to noise. Biological How to control: Controlling Biological is quit impel and common sense. If you have the flu, you take all the medication that is necessary, and stay out of public too avoid spre ading germs. If medication doesn't do the trick, going to see a doctor is your second most effective Way Of getting well again. Doctors will supply you with the proper medication or treatment that is required Personal Protective Equipment: wearing surgical masks when needed.Fire safety Examining and justifying the need for fire safety legislation/standards. The main reason why we have the need for safety and legislation standards for fire safety is so we all know how to handle a fire in he most safe and effective way. By exciting the safest ways etc. Before starting a new job, you must make sure you are aware of where all fire equipment lays in the area. Elements of fire include qualities of brightness, thinness, and motion. Fire we use the warm our homes, too cook our food, side around it to ward the night an active element which is contrary to water.Fire is the converter of the energy of other objects into other forms such as, heat, light, ash and smoke. Addressing fire hazards & fire prevention Messy crowded building, such as pulp mills have multiple fire hazards, to keep things safe and orderly notations, you can make signs, to notify people to the dangers that they might face. Or if you find an unsafe condition that you are unsure how too handle, report it! Tell the manager/coordinator. Fire prevention: Take cooking for example, to avoid fire caused by cooking; ;Don't leave cooking food/grills unattended. Keep things that can burn (think dishtowels, paper or plastic bags) at least three feet away from the stove top ; Loose-fitting clothes can catch on fire, so be sure to roll up long sleeves. Fire classifications and comparing the appropriate extinguishers Class A: Fires involving ordinary combustible materials, such as paper, wood, and textile fibers, where a cooling, blanketing, or wetting extinguishing agent is needed. Class B: Fires involving flammable liquids such as gasoline, thinners, lullabies paints and greases. Extinguishers for this type of fir e include carbon dioxide, dry chemical* and halogenated agent types.Class C: Fires involving energize electrical equipment, where a no conducting gaseous clean agent or smothering agent is needed. The most common type of extinguisher for this class is a carbon dioxide extinguisher. Class D: Fires involving combustible metals such as magnesium, sodium, potassium, titanium, and aluminum. Special dry powder* extinguishing agents are required for this class of fire, and must be tailored to the specific hazardous metal. Class K: Fires involving commercial cooking appliances with vegetable oils, animal oils, or fats at high temperatures. A wet potassium acetate, low pH- based agent is used for this class of fire.Electrical Safety/Hazards At home; Frayed or worn electric cords, Electrical appliances such as radios, hairdryers, or radiators used near showers, baths or swimming pools. Wet floors are resent where electricity is used. At School; The Smart Board wiring Ordinary outlets near wat er sources, faulty equipment. At work; Overloading electrical circuits and extension cords, Electrically operated office equipment such as computers, printers, scanners and shredders should also be checked regularly to ensure their power cords are not defective, frayed or improperly installed.Address these fire hazards by always having the proper equipment. Keep fire preventable materials locked up, never throw water of your fires in the kitchen, always salt or soda. Don't overload circuits by putting to many plugs into one. Electrical Safety Your own safety plan for establishing a safe work conditions are keep informed on how to be safe, do your research on electrical safety and let others know what you know. Lockout/tag out procedures; lockout is the isolation of energy from the system (a machine or equipment) which physically locks the system in a safe mode.The energy-isolating device can be a manually operated disconnect switch, a circuit breaker, or a line valve. Tag out is a l abeling process that is always used when lockout is required. The process of tagging out a system involves attaching or using an indicator Ladder Safety Step ladders are often used both for inside and outside electrical connections. Extension ladders allow the user to reach heights that step ladders cannot reach. Plat form ladders allows you to work on any project that requires you to use two hands as safely as if you were on the ground itself.Being able to rotate around and work in which ever direction you need helps you to work safer and faster. Folding ladders are normally used for smaller inside tasks. These ladders have the ability to fold up when not in use for extremely easy storage. Know The Climbing Limits. Look Around For Hidden Dangers Before Climbing A Ladder Tie Off Ladders For Safety Use Proper Ladder Angles What to inspect? Missing or loose steps or rungs, damaged or worn non-slip feet, loose nails, screws, bolts or nuts, rot, decay or warped rails in wooden ladders. Etc. Proper storage; where they are protected from the weather, horizontally on racks.Ensure that storage areas are easy to reach, tie ladders to each support point to reduce damage. Etc. Confined Space Safety TO find Out whether a space is confined or not, ask yourself, Is the space fully or partially enclosed? Is the space not both designed and constructed for continuous human occupancy? Confined space† means a fully or partially enclosed space, that is not both designed and constructed for continuous human occupancy, and in which atmospheric hazards may occur because of its construction, location or contents or because of work that is done in it.Confined Space Associated Dangers in confined spaces can include: ;Poor air quality: There may be an insufficient amount of oxygen for the worker to breathe. ;Chemical exposures due to skin contact or ingestion as well as inhalation of ‘bad' air. ;Safety hazards such as moving parts of equipment, structural hazards, entangleme nt, slips, falls. Uncontrolled energy including electrical shock. Before entering a confined space/Creating your own plan you should test the quality of the air, care should be taken to ensure that air is tested throughout the confined space – side-to-side and top to bottom.Always ensure the testing equipment is properly calibrated and maintained Rescue Plan Training requirements; address the following: the company's policy and confined space program limiting the employees' access to confined spaces and their hazards, they must recognize the confined space warning and identification signs; changes in use or configuration f non-permit spaces that could require the space to be reclassified as a permit-required space; and, finally, procedures that address employees of other companies who enter and work in the prerequisites confined spaces of the employer.WHIMS Why WHIMS? WHIMS is a System is a proper safety compliance system designed for workers involved in handling different ki nds of hazardous materials. Classes of WHIMS Class A – Compressed gas WHIMS Class DO. SVGA Class B -Flammable and combustible material Class C – Oxidize material Class D-l – Materials causing immediate and serious toxic effects Class D-2 – Materials causing other toxic effects Class D-3 – Bio hazardous infectious Labels on controlled products label is one of the ways health hazard information is made available to anyone using the material.

It's organizational leadership , How to convince and get people's Essay

It's organizational leadership , How to convince and get people's trusts so that they will follow me and my instruction - Essay Example Debatably, proficiency with a prominent vision is one of the most crucial aspects in getting people’s attention. People will give credit to an individual if impressed by the person’s capability to overcome unexpected circumstances. Heathfield (2013) asserts that in order to follow a leader, individuals must be confident with the course which the leader pursues. This ability will assist in consolidating people together into a group with similar objectives, which will result to company success. Needless to say, the subordinates will follow the leader’s instructions entirely. For instance, Steve Job’s leadership qualities allow cultivation of innovation capabilities among his employers, which ensures production of new company products such as computers and cell phones, company progress and customer satisfaction. Additionally, personality is extremely imperative to a leader. This is all about human’s common sense that determines which is right and wrong. Therefore, people can judge whether a person is outstanding or not. In this regard, individuals with a good personality can gather numerous people as their followers. Arguably, the society will love their personalities, follow them and obey their instructions. In essence, â€Å"the leader needs to have an attractive character combined with a pleasing behavior that leaves a lasting impression† (Cheng, 2010). For instance, Mother Teresa is one of the prominent examples of a great leader who expressed outstanding personality of helping impoverished children, people, and society. Until today, everyone still remembers her as a one of the great people in history. She is a leader who made people follow her attitude by doing great things. It’s difficult to attract people to follow what one does. However, if an individual has a prominent vision and expertise, it marks the first step to having followers.

Rise of modern state in europe, under international relations and Essay

Rise of modern state in europe, under international relations and politics - Essay Example The most undesirable conditions of military defeats, civil wars and revolution which were prevailing during the origin of the third republic had intense impact on every facet of the life of French men. There have been a lot of scandals during the third republican rule and the State’s relationship with the church was disturbing. In spite of all these issue the third republic succeeded in unifying the feelings of French men towards the state by breaking the regional, linguistic and racial barriers. Origin of the Third Republic of France The living conditions of the French men were disgusting and the rich were becoming richer and the poor were becoming poorer. They were facing food shortage and the terrible after effects of military defeat especially the disastrous defeat at Sedan in 1870 were tormenting the people. All these factors turned the preference of the working class and the upper middle class towards the formation of democratic republic. They demanded a self governing F rance and a government with fairer managing techniques (The Third Republic of France 2004). The republican government of France during the period starting from 1870 until the attack of Germany on France in 1940 is termed as the Third Republic which emerged immediately after the fall of Napoleon III (Bloy 2011). There were sixty governments in France during the seventy years period renowned as the Third republic and Paris Commune was one among them occupying the period from March 18 to May 28, 1871. Certain historians prefer to divide the period in to three sections as the monarchist republic (1870-1879), the opportunist republic (1879-1899) and the radical republic (after 1899). As an outcome of the defeat of Napoleon III at Sedan against Prussia, there was a situation of political confusion. This was a crucial stage and the French emotion was towards monarchy and they were expecting ‘The Comte de Chambord’ or ‘The Comte de Paris’, the former from the Bourb on family and the latter, the grandson of Louis Philippe to rule them. But the monarchists failed to agree on an appropriate candidate, which paved the way for the victory of republicans in several elections. The republican leaders gained public support and constituted a provisional government called as the ‘Government of National Defence’ consisting of 11 members and the government was led by Adolphe Theirs who became the president in 1871. Theirs made a lot of enemies around him by his famous statement â€Å"there is only one throne of France and two men can not sit on it† which resulted in the removal of the moderate republican president and Marshal McMahon representing the monarchist became the president (Anderson 1984, p. 5). The constitutional laws implemented in1875 gave definitions to the Executive power and the Legislative power. They were the laws on Senate, laws on the authorities, and laws on the election of Senators and representatives. The president was elected by the Congress and his tenure was seven years. The Executive power was supposed to be exercised by the president while the Legislative powers were on the Senate and the Chamber. The amendment in 1879 made the constitution more republican in nature. Official establishment and the first ever celebration of the national day in the history of France happened on 14th July 1880 during the period of the third republic (France History - French Third Republic 2011). Social

Libertarianism and Liberalism Essay Example | Topics and Well Written Essays - 250 words

Libertarianism and Liberalism - Essay Example Liberalism and libertarianism stress on the freedom of a common man (Vallentyne, 2012). This means that both the concepts are convictions in defense of people’s right of living their lives. This conviction completely rejects the idea of control over people’s will to live freely. In case of consideration of an example, it will not be incorrect to mention that it’s a person own choice to select his passion and interest, make use of his own wealth in his own favorable interest etc (Gaus & Courtland, 2011). Libertarianism and liberalism has been confiscated many times by critics for the debate of applicability on ethical grounds. Both the concepts are underlying with people’s choice of acting within a society (Gaus & Courtland, 2011). However, some claims that both the concepts cater the aspect of inappropriate manipulation of the concepts by people stealing and involved in criminal activities. It should be noted that both the concepts embrace the ideals of social and ethical responsibilities of citizens towards state (Vallentyne,

Gender Roles Essay Example | Topics and Well Written Essays - 500 words - 1

Gender Roles - Essay Example It will further highlight, with reasons, on whether or not the writer would change gender. According to Crooks and Baur (2011), human sexuality defines the manner in which we understand and articulate ourselves as sexual beings. The aspect of being male or female determines how one develops socially, with or without consciousness. It gives a fundamental source of motivation. For example, males are perceived as being more able to hold leadership positions than females, be it in political or business roles. Therefore, they can easily win elective posts. They are also considered to be able to physically defend themselves than females. This suggests that men’s masculinity accords them more physical strength than women. Financially, men are believed to earn more than women, although contemporary trends may prove otherwise among the younger generations. Depending on the generation, any gender can be financially independent. However, all these perceptions may only be stereotypical. Research has shown that women are better at handling emotional turmoil than men (Crooks & B aur, 2011). Women are less represented in emotional diagnostic categories, or impulse control disorders. In men, such difficulties lead to drug and alcohol abuse delinquency, violent outbursts and sexual misconduct than they do in women. Women are also confronted by less self-destructive and irrational sexual desires. Rather than wish to belong to the other gender, it is more prudent to accept oneself and work towards getting the best out of what one was destined to be. For instance, men can have female friends because women are prone to discuss relationships and offer more social support instead of indulging in activities aimed at disguising social ill. On the other hand, women can find comfort among themselves because they do not always reciprocate the platonic interests of friendship with men. Clearly, one would rather stay as they are and

Tax avoidance,tax evasion,tax mitigiation Essay

Tax avoidance,tax evasion,tax mitigiation - Essay Example Tax avoidance and Tax evasion are two of the most common terms and concepts used and utilized by the taxpayers in escaping from payment of taxes. Learning and understanding these terms will help the taxpayers avoid criminal and civil liabilities. Tax avoidance is a means to escape from taxation, which is allowed and sanctioned by law. A taxpayer committing this will not be legally held civilly or criminally liable to the government provided it is used in good faith and within the process allowed by law, otherwise the taxpayer will be committing tax evasion which is a crime. The utilization of the means and methods sanctioned by law would enable the taxpayer reduce the amount due to be taxed. Example of tax avoidance is when the taxpayer structures his/her any legitimate transaction to save tax and such transaction is what would really appear in form. And this transaction if the taxpayer is the vendee or payee could declare this as deduction. Tax Evasion on the other hand, is reductio n or elimination of tax due by means outside the law. It is illegally committed and punishable by law. A corporation, individual and other entity may resort to means in order to avoid paying the taxes. And the means employed is always dishonest like declaring less or no income, less profits or no gains than the taxpayer actually earned or it could be committed by inflating deductions. For example, a corporation will evade tax by declaring charitable contributions of $ 2.5 million as deduction although what was actually contributed is $.5 million only. The law does not allow this and anyone caught doing this will be held criminally and civilly liable. The difference between tax avoidance and tax evasion is on the tax itself. In tax avoidance, the taxpayer is legally avoiding the payment of any tax liability that is not in existence at the time. Meaning to say, there is no tax due at the moment of transaction and the taxpayer utilized method within the law so that no tax liability wou ld be incurred later or if there is, it would be less. In tax avoidance, there is already a tax due to be paid and the taxpayer resort to illegal means so that it will not be able to pay the owed tax. This type entails concealment or misrepresentation of earnings that are taxable immediately.. Tax mitigation is also similar to tax avoidance. Both resort to means not prohibited by law. Sometimes, these two concepts are used interchangeably. Tax mitigation is known as tax planning to mitigate or reduce tax liability. It is a conduct made to reduce tax liability without conducting tax avoidance or which is contrary to the intention of the Parliament. There are conducts which are allowed for tax mitigation and which are not in the case of tax avoidance. It is important in distinguishing one from the other, especially the two concepts which are tax avoidance and tax evasion because it will help the taxpayer in understanding the consequences of each conduct to reduce tax liability. Since tax avoidance is a criminal offense punishable by law, knowing the distinction would save one from committing this criminal offense while saving money from taxes without breaking the law. It will help taxpayers to arrange their affairs and keep taxes as low as possible. The tax code is confusing not only for average people but also for those knowledgeable professionals. Hence, it is important to define these two concepts so as not to fall into a criminally punishable offense. The Ramsay Principle: My understanding This principle emanated for two cases : W. T. Ramsay Ltd. v. Inland Revenue Commissioners, Eilbeck (Inspector of Taxes) v. Rawling, [1982] A.C. 300 and IRC v. Burmah Oil Co. Ltd., [1982] S.T.C. 30, H.L.(Sc.)decided by the House of Lords in connection with tax payment and schemes resorted to avoid it. In this case, the company in order to lessen the amount of taxes for the transaction of transfer of assets and payment resorted to scheme by drafting sets of documents,

Foundations of Critical Care Essay Example | Topics and Well Written Essays - 3000 words

Foundations of Critical Care - Essay Example Since this involved events surrounding a complex decision making at higher level where I am being guided by my mentor consistently, I felt John's model of structured reflection will be useful, and I will follow that in this reflective process (Johns, 1995, 226-235). Consequently, I will pay greater attention to my thoughts and emotions surrounding this event of my recent past experiences. This is the story of a patient whom I cared for in my placement in the critical care unit. In my placement in the critical care unit, my mentor assigned this patient to me. This is a middle-aged female patient who had abdominal surgery for her Crohn's disease and had been transferred to the intensive care unit for stabilization in a critical condition following anaesthesia. The intention of admission was to stabilize her and help her complete recovery form anesthesia so she can be extubated in the intensive care unit (Adam and Osbourne, 2005, 1-11). At assignment, I assessed her to find that she was sedated, was having very poor spontaneous breathing response, and intubated. She was connected to monitors, and a central venous pressure (CVP) line was inserted. A separate IV line was there, and it was running frusemide infusion at 2 mg/h since she was quite edematous. She was also advised hydrocortisone 50 mg intravenously three times a day along with her medications (Evans, 1998, 8-1 2). They diagnosed her to be in acute renal failure, and the management was expectant in that it would lead resolution of renal failure quickly. On my systematic assessment on assignment, my examination revealed that she has moderate oozing from her abdominal wound. However, her urine output was less than 40 mL/h, and from the urine in the bag, I thought that her urine was very concentrated. This is unlikely in an edematous patient with frusemide infusion. She was connected to ventilator at a PEEP of 10 to support her breathing. The striking feature was that her CVP was falling (Fitzpatrick and Donnelly, 1997, 271-279), and at the time of my care it was at 6. This was an obvious incongruence, and I discussed this with the Junior Doctor about her situation and requested him to reassess the condition. The doctor refused to relook at the situation and told that it was going fine. I felt frustrated since this patient needed to be assessed immediately for revising the management plan, an d I had hardly anything to do (Dowling et al., 1996, 1211-1214). Significant Issues From my academic learning, I knew that acute renal failure is not uncommon in a patient with prolonged and mutilative surgery. However, the care management must be collaborative in the critical care setting, since nurses remain closely attached to the patients during care delivery monitoring the patient on a minute-to-minute basis. Therefore, I felt I have a chance to know her progress or deterioration better than anyone else (Hudak & Galo, 1997, 16-26). Quite frequently, acute renal failures in postoperative patients are results of fluid depletion or dehydration, since the volume loss in the intraoperative period can be inadequately noticed. As the nurse in charge of her care, I felt the urge to actively participate in her care, and my input from that angle was to reassess her fluid status once again and to

Appropriation of The Department of Defense From The Federal Budget Essay

Appropriation of The Department of Defense From The Federal Budget - Essay Example According to the Department of Defense, the Bush administration in the US has fought the war on terror on the offensive to counter any proposed, planned terror attacks and to uproot terror camps in places such as Afghanistan and Iraq. The Defense department has claimed that the US military has been able to remove threats to US security in Afghanistan and Iraq and has liberated 50 million people of these countries. The Defense department has also claimed that it has raised pay levels for US service men and women and the rise in pay levels has been 21% with expanded targeted pays and bonuses. The military personnel and their families are also provided with better services and housing through new constructions and privatization. The defense budget has also shown an increased spending by 26% and this has been able to transform the Nation's defenses with the largest increase in military spending recorded since the Reagan administration. To improve readiness rates, transformational and joi nt training program has also been launched in the defense department with increased research and development funding by 56%. The Defense department has also claimed that there has been doubled investments in missile defense systems and the first ever land and sea based systems have been deployed (provided by the Department of Defense statement, 2005). The US defense agenda thus seems to be based on a war on terror, improving housing quality of military personnel, increased research and development in defense sectors, and increased pay for military personnel. The Department of defense gives further arguments in favour of an increased defense budget since the time of Reagan's presidential administration. According to the Department of Defense, the following reasons of Defense spending have been advanced. According to the Department of Defense, the Bush administration's agenda and defense spending - advances and promotes US' ongoing efforts in the Global War on Terror; provides for $401.7 billion of Defense Department's base budget, and this indicates an annual increase of seven percent, for a total increase in defense spending of 35 percent since 2001; makes considerable progress in transforming the Department to meet new threats and prepared to face new challenges; and continues improvements in the quality of life for US military personnel and their families by providing them with higher pay and better homes. (Department of Defense, 2005) Global war on terror and the need to meet new threats seem to have shaped the defense budget and increased defense spending to a whopping $401.7 billion with an annual increase of 7% and a total increase of as high as 35% since 2001. In comparison, China's Defense budget has also increased from $22 billion to nearly $30 billion in 2005. Thus although US defense spending seems to have shown a steady rise since the September 11 attacks in 2001, China's defense budget has shown drastic increases after 2002. China's defense spending may have been attempting to keep pace with other countries and defense budget has increased by 12.6%. China's defense spending is higher than that of Taiwan, India or South Korea. Although China's defense s

One child policy of China Essay Example for Free

One child policy of China Essay The issue of population growth has been one of the major problems faced by world over past century. The exponential population growth, popularly termed as population explosion, has led to unprecedented rise in human population, which has numerically grown by over 4 billion to 6 billion in the last hundred years itself. This enormous growth in human numbers has spawned social and economical problems of severe complexity, especially considering the fact that most of this growth has happened in economically underdeveloped countries of Asian and African region, particularly India and China, both of whom have seen their population growing past a billion mark. Supporting such huge number of ever rising population is indeed a challenge for any country, as natural resources threaten to run short, and economic privations become a general norm. Under such circumstances, population control becomes a necessary government objective, the validity, importance and meaningfulness of which are undisputable from environmental, economic and social angels. However, population control policies have always generated controversies from humanitarian and ethical viewpoints, the most noted example of them being the population control policy of People’s Republic of China that restricts couples to having just one child (Xue, 1996). Although highly effective under China’s strict state policies, it is indeed an extreme measure that has invited criticism from all over the world because for its forceful rather than coercive implications. Issues involved As stated earlier, unchecked rise in population is indeed an invitation to complex and unmanageable problems that no nation state can handle irrespective of its size and resources. However, the issues involved with China’s one child policy are very complicated and affect some basic concepts of right to life and existence China launched its aggressive family planning scheme in mid of 1970s when suddenly its policy makers realized the dangers of a rapidly growing population that had reached one billion mark by 1980s (Smith, 1991). In the previous two decades the government had failed to take in cognizance of growing population due to stability and improvement economic conditions, availability of medical facilities, medicines and drop in child mortality. More ominously, as demographers realized, the rapid growth of population in previous decades implied that by 1980 more than half the population was approaching marriage age, which meant that even under decreasing fertility rate, the Chinese population would reach 1. 4 billion by end of the century (White, 2003). This realization launched Chinese policy makers and government in a frenetic attempt to implement some of the strictest population measures that included a one-child policy per couple to contain the population under 1. 2 billion (Richards, 1996). This draconian measure was explained and justified from various social and economical angels, one of which was arguable shortage of cultivable land (Smith, 1991). As government argued, the cultivable land per person had come down from . 20 hectare in 1949 to . 10 hectare in 1980 due to almost doubling of population in the same period and hence the ensuing crisis demanded critical measures (ibid). Moreover the state infrastructure and its capacity to support such large population, provide adequate medical and educational facilities and ensure jobs for it would become increasingly difficult. As claimed by supporters of the one child policy, the policy was merely concerned with providing economic incentives and preferential treatment to families with one child such as paid pregnancy leave, lucrative salary bonus, and state sponsored or free educational and medical facilities, facilities that families with more than one child lack. Further disincentives created for larger families include financial penalty on birth of second and third child that are respectively 20 and 30 percent of the annual income of the family (Richards, 1996). The policy was tooth and nail opposed by a large proportion of Chinese people, and especially by those in rural areas but government decided to continue with it seeing its possible benefit in controlling the population question. One of the main problems disturbing Chinese leaders was China’s low GNP and very simple calculations showed them that to increase GNP in the longer run, they required to reduce or contain the number of people, which was the easy way against the hard route that involved working towards increasing the economic output (Feng, 1996). Containing population growth was presented was the single panacea that could increase per capita income, help achieve modernization plans, give impetus to the economy and solve the problem of additional resource requirements that rising population presented (Feng, 1996). The one child policy is considered officially successful and instrumental in significantly reducing birth rates, fertility rates, growth rates and death rates and its expected that soon the population would began to decline at a faster rate as children born after the implementation of the policy would have less desire to have a family of more than one child (Richards). Also to wash off its hand from the negative effect of the policy, such as increased number of female feticide, and suicides among Chinese females, the government insistently attributed them to backward and obsolete Chinese culture and customs. Conclusion Despite the claims of the supporters and the official government, it cannot be denied that the very concept of the one child policy involves flagrant violations of the rights to live, procreate and live socially. In its zeal to implement the policy, Chinese authorities permitted such extreme measures as forcible abortions and sterilization, which were openly illegal in every humanitarian statute (Xue and Xiaokang, 1996). By making childbearing an illegal act, the government forcibly tried to change the demographic dynamics with dangerous social consequences that threatens to create a mundane and homogenous society bereft of any relation except parents and in-laws. Also the one child policy triggered a large number of female-infanticide that threatened to dangerously alter male-female sex ratio in China. Of course the most cruel fate was reserved for those who were born outside this policy, that is the second and third child of the family who were denied any state support and facility in a perfectly state controlled society. In the wake of an economically prospering and comparatively stabilized China, it’s the call of the hour for Chinese government to finally abandon and bury its anti-people one child policy and work on creation of a more informed society.

Analytical Approaches in the Pharmaceutical Industry

Analytical Approaches in the Pharmaceutical Industry Miracles do happen and chances of happening such events are rare. Scientific discoveries have also seen such miracles. The approach and efforts required in scientific happenings are based on basic principles. The mode of application of these established principles differ from one stream to another stream of scientific disciplines. The principle of chemistry and physics are amalgamated to give rise to number of measuring devices. These devices are further restructured to suit application. Analytical chemistry can be defined as the science and art of determining the composition of materials in terms of their elements or compounds contained1 in it. Qualitative analysis gives useful details from which functional groups, structural features, atomic species or molecular species. Quantitative analysis gives numerical data in units i.e. percentage, parts per million, moles per liter etc. In above two types of analysis, the required data is obtained by measuring a physical property which is characteristically related to respective component of interest i.e. the analyte2. The most important aspect of analysis is quantitative analysis. The techniques of analytical chemist are of vital importance to the drug and pharmaceutical industries. Products are usually complex organic compounds or mixtures. Drugs prepared for human consumption requires strict standards of product quality be established and maintained. In past, methods of biological assay were often the only measure of product activity available. With the advent of modern instrumentation, techniques of analyst became more versatile and less time consuming, and quantitative analysis supplemented and sometimes replaced biological assay. In those instances where it is possible to establish a rigorous correlation between biological activity and chemical composition of product, analysis can be invaluable in controlling manufacturing operations as well as in determination of product purity and activity. It is noted that the progress and advancement of analytical chemistry depends to a greater extent upon an intelligent application of the fundamentals of physical chemistry and close relationship between physical and analytical chemistry. Recent rapid progress in physical methods of analysis, in many instances, resulted from pioneering investigations of scientists, principally physicists. In 1930 Willard recognized the demands being placed on analytical chemistry by rapid industrial progress. A parallel recognition of importance of analytical chemistry to industry occurred in Europe in same year. Churchill states that contribution of the analytical chemist to research program will be most effective if he is given the opportunity to participate while the program is being planned. In 1940s several direct reading quantitative spectrophotometers were reported. In these instruments the emitted spectral energy of certain chosen lines is transformed to a proportional electrical output by photomultiplier tubes. By suitable amplification and with appropriate recording devices, percentages of the constituents present are automatically recorded. The outstanding advantage of such equipment is its ability to reduce the time requirement for performing an analysis. New information made available by combining various tools of analytical chemist, has been described in several articles. The methods of analysis used to solve industrial problems may be classified as:- Fully developed, generally accepted methods of analysis. Generally accepted methods which are adapted to make them suitable for the problem. New methods which must be developed when available ones are not adequate. Industrial analysis is defined as the utilization of chemical and physical techniques for solving problems arising in industry. In some industrial processes it is desirable to obtain a very rapid or continuous analysis of a product or mixture. Considerable progress has been made in developing automatic method of analysis to fulfill this need. While it has not often been possible to automate entire procedures, from sampling to recording of results many examples of partly automated analytical operations can be cited. Factors pertinent to evaluation of analytical methods in each of these groups were discussed in the present section. A method of analysis is standard or accepted only in the sense that a number of analysts have judged it to be adequate for obtaining certain analytical information. Ideally, analyst views the standard method as a â€Å"best approach† rather than an obvious solution. If satisfactory results are obtained the method can be applied to the sample under consideration with some assurance that the experimental procedure is not at fault. The analyst himself should perform this part of work even if future measurements will be carried out by technicians or laboratory assistant. Only by performing the manipulation and observing the reaction can the analyst forming thoroughly acquainted with the details of an analytical procedure. The advisable method is when it appears to give satisfactory results, include consideration of interfering elements or compounds and determination of blank. While interferences which prevent a method from working properly are readily detected, those which produce a constant error in the analytical result are much more insidious and seldom apparent. Determination of a blank eliminates possible source of constant errors, such as contaminants in reagents and uncorrected background in instrumental measurements. In many standard methods the design and dimensions of the equipment are critical, particularly when properties of material rather than its composition is being studied. Many modification of an analytical method are possible and each problem or sample dictates the changes required to make the method effective. In some methods modification involves change in equipment or technique. For example, numerous spectrographic procedures have been developed for analyzing the metallic contaminants or additives in lubricating oils. Methods, which fail or suffer loss in sensitivity when certain interferences are present, may sometimes, need to be modified by introducing an additional step in the procedure which eliminates or deactivates the interfering element. Once a procedure has been adapted to a particular problem it may be evaluated in the same manner as a standard method. The usual precautions related to proper manipulation and standardizations, avoiding contamination and blank determinations must be observed. When problem is confronted which cannot be solved with established methods of analysis, it becomes necessary for analyst to create and develop new analytical procedures. This situation arises when any or all of the following factors are in effect. The substance sought has not previously been determined, when no methods are now available for all elements. The substance sought is a component of a mixture not previously analyzed. Any other element or compound present in a mixture may invalidate established methods of analysis by interference effects. Sometimes the component producing the interferences can be eliminated and a modified form of the original procedure can be used, as already described. Higher order of sensitivity is required when component sought is present in small quantity (mg). A method capable of analyzing in desired concentration range must be developed. Problems arising in industry are complicated by sample limitations. Often the sample is available in very small amounts and special techniques are required for gaining maximum information from a minimum quantity of material. Analysis must be non-destructive. At times it is required that the sample remain unaltered by the analytical procedure. For example compositional information on an expensive finished product is required, a non-destructive analytical method. Speed or time is critical requirement when conventional methods cannot complete an analysis within a prescribed time requirement, faster methods must be developed. Analytical Chemistry importance in different scientific areas: Importance of analytical chemistry in related scientific areas can be demonstrated by considering analytical chemistry’s impact on clinical analysis, and in pharmaceutical research and in quality control. Sensitive chemical and instrumental tests were advised in order to detect abnormal and normal components of body fluids. Blood and urine samples are determined for percentage of glucose, urea, nitrogen, protein, sodium, potassium, calcium, uric acid etc. Similarly, the quality of manufactured drug in tablets, solution and emulsion form must be carefully controlled in pharmaceutical industry, otherwise the drug can itself affect the therapeutic value. In other pharmaceutical studies, it is important to establish properties and therapeutic value of a drug before the drug is approved and made available to the public. Analytical Techniques: Few of medicinal products were still being analyzed by time-tested procedures of gravimetric and also titrimetric procedures. A wide diversity in different type of analytical techniques has been characteristic of assay methods for pharmaceutical products. Different analytical techniques were been employed for estimation of wide variety of components in the formulation:- Titrimetric and gravimetric method Colorimetric and UV spectrophotometric method Paper chromatography Preparative thin layer chromatography Column chromatography Ion-exchange chromatography Flame photometry and atomic absorption spectrometry. Variables in Quantitative Analysis: Inhomogeneity of the medicament Sampling error Preparation of samples such as extraction Precision, accuracy and ruggedness of the method Random error including that of the operator. Newer Analytical Techniques: As technology is developing, a number of new drugs are launched in the market and it is essential to develop new methods of analysis. It is necessary to do if; No analytical methods are available for a drug in official books such as pharmacopoeias. No literature reveals methods for estimation of drugs. Analytical method available only for single drug in a combined form of drug. No method reported for the estimation in biological fluids. NEED OF ANALYTICAL APPROACHES IN PHARMACEUTICAL INDUSTRY The pharmaceutical industry has always had in place a series of process controls which assures the integrity of the end product. â€Å"A simple way of looking at it is that the Food Drugs Act Regulations are merely an auditing mechanism to quantify that industry has sufficient process controls and documented procedures in place to ensure they are in complete control of every aspect related to drug manufacturing,† There are in essence, three pillars to drug manufacturing and distribution: 1. Quality Assurance (QA) 2. Good Manufacturing Practices (GMP) 3. Quality Control (QC) Quality Assurance is ensuring that you get what you pay for. It is the insurance policy for the manufacturer.† As a brief overview, the GMPs are part of Quality Assurance and ensure that drugs are produced consistently and are controlled at each and every step. QC is a part of Good Manufacturing Practices and is responsible for sampling and also for testing. It examines and ensures that all aspects of product from raw materials and integrity of the product itself to the packaging materials and insert, meet their specifications. It encompasses testing of the end product and all of its primary ingredients. QA covers documentation of all of the procedures that have taken place from start to finish of entire process. This, in combination with QCs sampling and testing, allows QA to ensure products integrity, purity and potency have not been compromised and it has satisfied all requirements. When QA is completed and satisfactory, the final step is permitted allowing a product to be r eleased for sale to the consumer. But, their job doesn’t stop here. Since Quality Assurance is responsible for assuring that final product is meeting quality, consistency and integrity for its intended use, it must also account for when the product leaves the manufacturing site. Thus, QA is also responsible for ensuring that appropriate arrangements have been made with distributors and warehouses to guarantee that the product is handled, stored and shipped in such a way that its quality is maintained for the duration of its approved shelf life. The overall time required for development of a pharmaceutical from Discovery Research through to the Regulatory Review Phase. There is clear evidence that this can in some cases take upwards of 15 years with costs reaching into millions of dollars. With this level of Research and Development investment, the industry has no intention of allowing a breakdown in final stages of manufacturing and distribution process. Therefore, before a product actually reaches market, QA involvement is also the key in the registration dossier preparation. A portion of this dossier contains a Master Production Document (MPD) which outlines exactly how the product will be manufactured. Within this MPD, a manufacturer defines clear specifications for all raw materials, packaging materials, in-process and finished product along with the sampling procedures and also Standard Operating Procedures (SOPs) related to critical processing. The issuing of a Notice of Compliance and a Drug Identification Number are contingent on a complete and acceptable Master Production Document. Then manufacturing license holders are also responsible for conducting an annual self-inspection and documenting their procedures and processes are in compliance with the requirements of the GMPs. If the manufactured product is stored in bottles (syrups), fabricating, packaging/labeling, importation, distribution, wholesale (Schedule C, D, F or G products) or testing of pharmaceutical products must first hold an Establishment License issued by Government. PRESENT STUDY: Development of new drugs, drug manufacturing is dependent on drug analysis. Pharmaceutical companies depend upon drug analysis quantitatively to conform that the raw materials used, in-process compounds and final products manufactured were meeting the required specifications. New drug formulations and new drugs were introduced into the market at increased pace compared to earlier days, as the technology is developed. These formulations and drugs were either new chemical entities or partial structural modifications of existing drugs or new dosage forms. Frequently, it happens that the new drugs inclusion in pharmacopoeias will be delayed because of several reasons. Hence these standards or the analytical methods for these drugs may not be available in pharmacopoeias. Hence it is essential to develop new methods of analysis for these drugs. Based on this, few combinations were selected for the present studies which were currently marketed from Anti Hypertensives17-22, Anti HIV23-35 and Non Steroidal Anti Inflammatory Drugs36-47. Amlodipine Besylate Telmisartan Lamivudine Zidovudine Thiocolchicoside Etoricoxib Literature survey was performed extensively and it was found that spectrophotometric methods were reported and also HPLC methods were reported for the determination of these drugs from their biological fluids. However, there were no reports found for their quantitation by HPLC methods from their formulations. Hence it is essential to develop newer rapid analytical methods3-16 on HPLC.

Racial Preferences and the Constitution Essay -- Supreme Court Race Es

Racial Preferences and the Constitution The Constitution has survived two World Wars, a Civil War, and even slavery. This piece of paper was written to limit government in our lives and proclaim our rights as individuals. Through the course of time, Amendments have been added to aid in current events that were not foreseen when the Constitution was originally written. Sixteen presidents after the Constitution was written, slavery was abolished and the Thirteenth Amendment was passed.. Three years later came the Equal Protection clause in the Fourteenth Amendment and two years after that, the Supreme Court addressed voting rights in the Fifteenth Amendment.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  The decisions in Plessy and Brown are similar because of how the decisions affect the group instead of the individuals. The Court is continually ruling in regard to race instead of the individual. If the Constitution is truly color blind, then we would not have these distinctions between classes when the rulings are made. Each ruling by the Court should be done on an individual basis and by the merits of that particular individual instead of the color of ones skin. The only reason the court rules in favor of Brown is because the implications go beyond just the individual affected, the ruling will affect the entire black race. The effects of the Brown case go a lot further than the immediate case.   Ã‚  Ã‚  Ã‚  Ã‚  After the states had failed to integrate blacks and whites in society, the Federal Government stepped up to end this atrocity. For years and years citizens in each state have attempted to forgo the three Amendments mentioned previously. In each case the Courts have attempted to use Harlan's dissenting opinion in Plessy as their guide to uphold this "color blind Constitution."   Ã‚  Ã‚  Ã‚  Ã‚  In recent cases concerning racial preferences, the Supreme Court, largely under the leadership of Justice O'Connor, has articulated a new doctrine concerning the constitutionality of governmental racial classifications under the equal protection clause of the Fourteenth Amendment. The Court has determined, after twenty five years of debate, that the most stringent standard of review applies to all such classifications, even those intended to benefit rather than to burden historically disadvantaged minorities. This standard has been applied to racial preference programs in employment, state and federal ... ... Bakke v. Regents of the University of California also previously mentioned. In each case we are dealing with issues that supposedly were put to a halt with the 13th, 14th, and 15th Amendments. The Constitution continues to help some people and hinder others. Still over a hundred years later, we are still having conflicting results and are still referring to Harlan's dissenting opinion about a color blind Constitution.   Ã‚  Ã‚  Ã‚  Ã‚  Every time the Supreme Court rules in favor of one thing the equal protection pendulum swings the other way just enough to inflict color on this color blind Constitution. Will the Constitution ever be color blind? One day when every race is mixed together and no one can claim that they are solely of one particular ethnic origin is when this color blind Constitution will occur. There are too many prejudice groups in society to say that the Constitution will soon be clearly color blind. I think the Supreme Court has an intent to make color blind decisions without understanding the inevitable outcome. The pendulum has to be in the middle for a color blind decision to be made. Any time you make an exception for one group, there is another group being affected.

Japanese Art Essay -- Japan Artistic Arts Japanese Essays

Japanese Art Japan’s Art, although sometimes over looked has evolved through many different periods. Its simplest forms in the Archaic period and last on its more complex period the Ego Period. Even though some skeptics believe that Japanese art can not compare to the art of the Greeks or Romans. Japanese Art yet simple is refreshing and has left Japan with wonderful shrines, paintings and traditions. The periods of Japanese art are the Archaic, Ask, Heian, Kamakura, Askikaga and the Ego periods. Each Period has taken Japan to a new level of art. Starting with the Archaic period, Japan was a prehistoric society where its art consisted of well crafted vessels, vases, and tools. Most vessels and vases were constructed to look like they were surrounded in rope but in reality it was part of the ceramic and clay pieces. They lived in pit dwellings with thatched roofs on bamboo stilts. The Japanese did however build shrines in this period. These shrines were consisted of many buildings and were concentrated around a central axis. The symmetrical system was off set by a gate and a building were only the deity could dwell. The most famous of these Shrines is the Ise Shrine. This shrine is 55 yards by 127 yards and is completely fenced in. The Shrine is also made entirely out of wood! With the building of shrines the Japanese moved into a new period, the Asuka period. The religion of the people changed to Buddhism which also cha...

A Dolls House: Nora Essay -- A Dolls House Essays

AN  ANALYSIS  OF  NORA, THE MEN IN HER LIFE, AND  HER  NAVIGATATION  TO INDEPENDENCE The  play,  A  Doll  House,  written  by  Henrik  Ibsen  in  1879,  is  considered  a   landmark  in  drama  for  its  portrayal  of  realistic  people,  places,  and  situations.  Ibsen   confines  his  story  to  the  middle  class.  He  writes  of  a  society  that  is limited  not only  by  its  means  of  livelihood  but  also  its  outlook.  Ibsen  portrays  his characters    as  preoccupied  with  work  and  money, showing a reduction of values  in  and that lack of quality persons with morals.  Ibsen  takes  this  realistic  story  and  invests  it  with   universal  significance.  Wrapped  up  in  the  technique  of  this  well  constructed   play, Ibsen  is masterful  in  his  presentation  of  not  only  realism,  but he  holds  a  mirror  up   to the  society  of his day by  using  the male  figures  as  catalysts  for  Nora's  ultimate   knowledge  of  self-actualization.  He  accomplishes  this  with  such  precision that  the  audience  might  not  be  aware  all  the  subtleties  that  are  creating  their theatrical  experience.  Ã‚   In  A Doll House,  Nora  forges  the  name  of  her  father  and  risks  damaging  her   husband's  good  name.  Ã‚  Henrik  Ibsen  offers  remarkable  insight  into  the  nineteenth   century  preoccupation  with  the  family  and  the  role  of  the  father, and what role is projected upon those who are subjugated to him.  This  play  takes  up  the  subject  of   strong  women  and  weak  men within the plot. A  prominent  theme  within  this  drama   is  the  deterioration  of  the  male,  who is aware  of  his  role  as  a  "father  figure". This decomposition is observed by the female protagonist (Nora). It is this descent that the role of the father figure is shaped, while creating the  catalyst  for the catharsis or  change  in  Nora.     When  the  female  protagonist  challenges  patriarchal  authority,  she  does  so   by  undermining  in  one  form  or  another  both  the  dominant  male  and  his  family  name. The  following  analysis  focuses  on  Nora's  ultimate  realization  that  she  must  be  an   emancipated  person  to  be  her  true  self.  Her  navigation  through  the  elements  of   crises  are  focused  through  the  father-figures  in  her  life.  The  journey  towards  her   self-actualization  and  rising  freedom  can be found  within  her  relationships  with   the  men  in  her  life.  This  ultimately  identifies  the  relevant  thematic  elements   that  are  pivo... ...he  chooses  instead  to  see   herself  as  someone  in  process,  in  a  state  of  becoming,  rather  than  of having  defined   being.  Nora  discovers  that  because  her  own  signature  had  no  value,  she  had  to  take   the  name  of  the  dead/absent  father. Eventually  realizing  that  she  cannot  escape  the   ghost  or  the  name  of  the  absent  husband/father.  Ã‚   Thus, through Nora’s association and interaction with her father figures she, in a broader sense,  hints  at  the possibility  of  a  new dynamic for the family and society as a whole. A time in which the person, no matter the gender, is allowed to sign for him or herself rather, than use the name of an father. In  A Doll House  Nora  discovers  herself  disenfranchised  and  disembodied  by  her   father's/husband's  name.  This only occurs by virtue of her inner resolve and the inherit flaws Ibsen has given to the male characters of the play. She finally  rejects   both her father and husband  and  affirms her ambition to  write  her  own  destiny. Works Cited Ibsen, Henrik. A Doll House . Drama: A HarperCollins Pocket Anthology. ed. R. S. Gwynn. New York: HarperCollins. 1993. 153-212.

Lester Brown Who Will Feed China Study Guide Essay

1. Who will feed china looks at china specifically but does so in a way of how things happening in china impact the rest of the world. 2. After releasing the article, china gov’t initial response was a disagreement to brown’s hypothesis. They said by 2025 they would double their grain production so it wouldn’t be a problem. But then grain prices soared and they started to have to import grain so then they asked for brown’s help. 3. People understand that the standard of living in the US could not work for the entire world. 4. The earliest constraints in attempting to make this transformation are food supply. 5. Resource constraints are grain and grain production. As well as water supply and quality. 6. In China, if internal constraints are faced by producers, what solution will the state most likely pursue? They are most likely to import scare resources. Is their historical precedent for such a solution? Japan, Taiwan, and S Korea did this but they have nowhere near the populatoni and people to feed as china does. What impacts can be expected from such an approach both internally and globally? Prices will go up around the world! 7. The gov’t wants to keep prices on grain high enough to keep the farmers on their land but low enough so people in urban areas can afford to eat. Based on your reading of Brown, from the standpoint of China discuss the relationship between industrialization, farmland, consumers, and international trade. 8. 6. In some detail discuss the precise relationships between grain lands and industrialization in China. How does this relate to Brown’s statement that grain production will fall not as a result of agricultural failure, but from industrial success. 9. What is the â€Å"wake-up call†? China’s emergence as a massive grain importer will be the wake-up call that will signal trouble in the relationship between ourselves, now numbering 5.7 billion, and the natural systems and resources on which we depend. It may well force a redefinition of security, recognition that food scarcity and the associated economic instability are far greater threats to security tha n military aggression is. 2. Another Half-Billion  Describe the population trends in China between 1990 and 2045. What will the impacts be of these trends on agricultural land? Population will peak in 2045 at 1.66 billion then start to decline slowly. 1990 they hit 1 billion. In Asia compared to Europe, way more people per hectare. And Europe pops have stopped growing while Asia’s go up and up. Population and birthrate declined with the famine but soon got back up again. More people will be depending on agricultural land. 3. Moving Up the Food Chain How does â€Å"moving up the food chain† affect agriculture in China? Discuss this in some detail. As people acquire more wealth, they go for more variety in their diet which is usually more expensive and puts more stress on agriculture. This also means consuming more livestock. Much more grain is used, a lot of the time as feed for livestock. Can also be used for beverages like beer, scotch, vodka†¦ and of course breads, pasteries†¦growth in meat consumption is one of the best indicators of china’s transformation economically. Mostly pork, not as much beef as the US. More meat = more grain needed. Starting to import grain, sugar, and soy/vegetable oil will put pressure on world supplies and increase prices everywhere. 4. The Shrinking Cropland Base What trends are occurring in China’s total agricultural land and why? Cropland is decreasing due to infertile soil, farmers switching to other crops not grain, construction of industry going up in spots where crops once were, and no longer doing multiple crops. What historical precedent exists to understand these trends? In Japan, Taiwan, and S Korea; those countries had dense population and then turned to industrialized nations. Farmland vs. industries. Need more room for housing, highways,(increasing automobiles means more roads, parking lots†¦) more people more room for their stuff. 5. Spreading Water Scarcity What are the causes? Water use has increased greatly. Due to population growth, irrigation expansion, rising affluence, and industrialization. There are depleting aquifers in northern china. Lots of irrigation to china’s cropland. Very land intensive. Originally came from dams but now it is coming from ground water as well. Farmers need water for their crops, but now they are having to turn to less intensive/profitable crops. Instead of rice they might plant a stable crop like millet, while this uses less water it also is not as good. The increased need for grain import is only going to increase. They are tapping into ground water, but the aquifers can’t replenish fast enough. Is there any hope? The need for water is only going to increase. Agricultural, industrial, and residential needs are all there. Poor distribution throughout the country. Where there is cropland, there is no water (N. China) and where there is water (Yangtze River) there is not as much cropland. This makes water scarcity even more of a problem. Likely to deline the grain production there even faster. Proposed building a canal to bring water to Beijing but it would be very expensive and cross a lot of rivers and streams. 6. Raising Cropland Productivity Is there much room for increased productivity? They need to increase rice, wheat, and corn production. With new technologies they can do it and have somewhat but there doubt that any increases will be very dramatic. Reached a point where farmers using too much fertilizer so not making as much of a profit, much like what happened with the US. As noted earlier, the central question is whether future rises in land productivity will be sufficient to offset the loss of cropland to nonfarm uses as industrialization progresses. Barring some dramatic new technological breakthroughs, this now seems unlikely. 7. Growing Grain Deficit What was the Japanese experience? Loss of grainland due to land being used for other purposes like industry. Wages climbed for non ag. Jobs and so more people moved into the city and out of rural areas. Causing a reduction in multiple cropping. Results in steady decline of grain production. Japan went down 1% per year. Consumption went up and so did import rates. How could the Japanese experience affect China? China will need to import much of it’s grain if it continues to industrialize. But china doesn’t have seafood it can feed it’s people with. It also has shortages in water that japan didn’t have to deal with. So it china’s impact on the world grain market will be much stronger than japans. 8. Competition for Grain What might world markets look like in the near future? Price of grain would rise, but even if it doubled china would be able to pay for it. However there isn’t enough grain available to supply them with of all countries put together. Consumption would likely decrease around the world.

Business Process Reengineering Essay

Fundamental rethinking and radical design to achieve dramatic improvement in cost, quality, service and delivery (Hammer & Champy, 1993; Manganelli & Klein, 1994). It means that business process reengineering involves many steps that change the entire business process. This is done to reduce the cost of production of a product or service, increasing the quality, and satisfying customers by offering an excellent service and delivery. BPR can be done in four ways that are: i. Business transformation By using this way, the whole organization is changed. This includes the business process, business management and business strategies. ii. Redesign business process In this way, only the business processes are changed. Usually, the number processes will be reduced. The non value added processes are eliminated. iii. Business process change management This is the process for managing human/employee side of change. It includes the steps taken to change the management team or a project leader. iv. Redesign strategies and value added processes It means that the organization changes the business strategies and creates or improves their value added activities. Objectives of Business Process Reengineering (BPR) There are many objectives of business process reengineering. The main objective is of course to increase the effectiveness and efficiency of the whole business. Listed below are the specific objectives of business process reengineering: i. To save time and cost Time can be saved once the non value added activities are removed from the process as there is fewer work process to be done. This will lead to cost saving as the cost incurred during the production will also decrease. As the cost decreases, the profit margin will be higher and it will lead to a greater income for the company. ii. To improve the quality of work By implementing business process reengineering, the fragmentation of work can be reduced. This is contributed by the fewer process involved in production. This will reduce the errors that occur in production as fewer machines or human are involved. The performance of the business process reengineering can be improved through feedback received by the users of the goods or services. iii. To satisfy customers This is also one of the objectives of implementing business process reengineering. Customers will always be the main priority. BPR will ease the customer in many ways. For instance, nowadays we no longer have to stand in a queue line while waiting to be served if we go to any bank as the number system had been introduced. This is one example of the contribution of business process reengineering for customers’ satisfaction. Advantages of Business Process Reengineering i. Lower cost Reengineering proves to be cost effective as the cost of operating after implementing BPR will decrease significantly. ii. Better use of existing staff The existing staff expertise can be retained enhance through training them at the point of implementation of BPR. iii. Increase effectiveness and efficiency As the employees are aware of the processes that they involve in that has been reduced, it also reduces the time lag between different process. Implementation of BPR Key Steps: Selection of strategic added value processes Simplify new process Once the engineering take place, organization should stop and execute the selection of idea from the above step. The top management cannot live in limbo between yes or no and what are going to do with the idea. Organize a team & workflow Assign responsibilities Train the process team Manager will act as a coaches for the workers as they do not orders but they will guide, direct, coordinate and empower the job to the workers. This involved the top management and subordinates in working together as a team. Critical success factors required to compete are identified and prioritized. Participative business makeovers reject the â€Å"top- down† approach to reengineering in favor of a middle ground, where the managers and workers come together to redesign business processes. The BPR team will be split into two parts, a design team made up of senior managers, and an execution team composed of people who will actually do the work Introduce the redesigned process These initiatives seek to provide understanding of the markets, competitors, and the position of the organization within the industry Implementation BPR Success factors Revising reward and motivation system New reward and incentive scheme must be revised as supporting BPR effort to encouraging people to endorse BPR such as introduce new job titles in order to motivate the workers to the new system implementation. The workers are a resource for an organization to manage the operation effectively. The BPR will successfully be implemented if the workers are highly motivated to the changes made. Effective communication It is needed throughout the changes process at all levels in order to ensure patience and understanding among all employees. Communication breakdown between top management and the workers tend to happen due to the significant changes in the new system. By improving a better way of communication could lead the company to successfully implemented BPR in the organization. Empowerment The organization should establish a culture which staff at all levels feel more responsible and accountable to their respective job scope. Empowerment will make the staff feel more appreciative of their work when the organization give them the authority which in other means recognized and appreciate their work towards the success of the organization. The staff also will be able to set their goals and monitor their own performance thus supporting the implementation of BPR. Management of risk BPR involves radical changes to several systems in organization. Continuous risk assessment is needed throughout the implementation process to ensure the BPR success. The calculation of risk will help the organization in decision making regarding BPR implementation. Aligning BPR strategy with corporate strategy As corporate strategy determines objectives and guidance on how the organizational capabilities can be best utilised to gain competitive position, BPR strategy guides the alteration of tasks into integrated process. It also must accompanied by strategic planning in order to be successful in the long run. Kaizen Costing Introduction Kaizen costing also has a Japanese heritage. It comes from the combination of the Japanese characters ‘kai’ and ‘zen’ which mean ‘change’ and ‘good,’ respectively. The word ‘Kaizen’ translates to ‘continuous improvement’ or ‘change for the better’ and aims to improve productivity by making gradual changes to the entire manufacturing process. Masaki Imai known as the â€Å"Lean Guru† and the father of Continuous Improvement (CI) Masaaki Imai has been a pioneer and leader in spreading the Kaizen philosophy all over the world. Understand Kaizen Costing To understand Kaizen costing, one first needs to grasp standard costing methodology. The typical standard costing approach works by designing a product first, and computing costs by taking into account material, labour and overhead. The resulting figure is set as the product cost. The standard cost is set and revised on a yearly basis. Cost deviation analysis involves checking to see whether the projected cost estimates tally with the final figures. Manufacturing procedures are assumed to be static. In example, approach centres around recognizing that employees who work on a particular job are aware of how that particular task can be greatly improved. Employees are treated as valuable sources of viable solutions, an approach that differs greatly from the standard cost system that views employees as labourers with variable performance levels. Goals In order to properly implement Kaizen principals for process improvement, there are four goals towards reaching successful implementation of Kaizen: 1. To ensure that actual production cost are less than the prior year cost. 2. To reduce the difference between profit estimates and target profits (every department in the company makes an effort to introduce operational changes on a daily basis). 3. Analyzing every part of the process and generating ideas on how they can be further improved. 4. Kaizen costing takes into account aspects such as time-saving strategies, employee efficiency and wastage reduction. Advantages Focus on customers Kaizen permits no middle ground its either you provide best products and customer satisfaction or not. All the activities should aim at providing customer with whatever he wants and should help the firm long term objective of customer’s satisfaction at the same time building up good relationship. It is a responsibility of each and every person working in a Kaizen company to make sure that the product is up to the mark and it satisfies customers need. Make improvements continuously In order to search for excellence just does not end. We should work on the improvement implemented and see if we can make it even more effective. Acknowledge problems openly Every company has certain problems related to finance, competition, change in demand etc. Kaizen companies are no exception, but by fostering an appropriately supportive, constructive culture it becomes easier for any team to get its problem in the open. The whole organization works as a team to solve the problem. The problems are openly shared by the management with the employees which avoids rumours. It simply means â€Å"FIGHT WITH YOUR PROBLEMS DON’T RUN AWAYFROM THEM†. Promote openness There seems to be less functional ring fencing i.e. only the senior managers have private cabins. Otherwise the workplace is generally open and in many companies even the dress code and canteen for everyone is the same Create work teams Each individual in a Kaizen company belongs to work team headed by a leader. Working in various overlapping teams draws employees into corporate life and reinforces the mutual understanding. Cross- functional teams Kaizen states that no individual or team has all the required skill and knowledge to complete a task. Cross-functional teams help in getting all the valuable information’s from the view of all the related people. It calls for letting ideas to flow as wide as running on moon. Disadvantages Reluctant to change Most employees do not like changes as it will lead them to a new style of working Too much suggestion may lead to confusion and time wastage. By giving the opportunities to help in getting all the suggestion from the view of all the related people, they may be confuse to focus what are the best way to follows and also required a lot of time in considering which ways is the beneficially to them. Real life example: A Case Study of New Kaizen Activities at Tahara plant (Toyota) This type of costing was used by Japanese automobile companies (Toyota). The assembly line at Tahara plant was reorganized in 1995 clearly following the new concept realized first at Toyota Kyushu. However it was the assembly section itself that conceived this new assembly line, taking the initiative in product design and reconstruction of the assembly line. It began in 1991 where the revision in 1995 of the Hilux Surf (sports utility) being assembled and the assembly of another sports utility (Land Cruiser Prado) from 1996 were planned. On the basis of discussions held in the Committee above mentioned, the director of this assembly plant suggested to his assembly section’s manager (section chief) to prepare the revision of this sports utility by searching for an ideal assembly line. He then started to conceive it and organize engineers, â€Å"try team† staff, chief leaders and group leaders so that everyone would collaborate in order to realize an ideal assembly line about which he did not have any clear conception. Then he fixed the orientation toward the reconstruction of his assembly line as follows: Construct an assembly shop where the workers can work easily and execute  their operations â€Å"rhythmically†; Organize a human centered Toyota Production System; Form a kaizen mind of everyone so that he/she willingly does kaizen. The section chief thought that if the assembly shop were organized in such a way, it would also contribute to increase production efficiency assuring quality and security, and then to reduce costs. There were many problems to solve, which necessitated the collaboration of the product manager of these models, Product Engineering Design Sections, Production Engineering Division as well as those of Araco and Hino (Araco designs the body of Land Cruiser Prado; Hino, that of Hilux Surf whereas Toyota develops their chassis). In fact, the conception of new assembly line could not be developed without modifying vehicle structures and parts designs of these models. Comparison between BPR and Kaizen approach. Re-engineering Kaizen Type of process Work best: cross organizational boundaries as complex interrelationship of variables. Work best: with well defined boundaries. Degree of change Incremental or radical and usually affect an entire integrated process. Incremental or radical but usually only affect a limited sub process at a time. Speed Generally implemented in a big bang changeover Generates immediately noticeable and measurable changes Acceptance High risk of things reverting back to the way they were soon after the consultants leave. Since the people that actually do the work are the ones making the changes – acceptance are very high. Cost Often involves expensive technologies, computers, and other system. Most â€Å"lean† changes are inexpensive or even free. Technology Reengineering project is often led by computer consultants. Most â€Å"lean† methods minimize or even eliminate reliance on technology with a preference toward visual methods and simplification. Similarities of Business Process Reengineering and Kaizen Approach i. They increase the effectiveness and efficiency of the way the organization operates. ii. These two approaches focus on lowering cost. iii. Customers’ satisfaction is always the goal for these two strategic management accounting approaches. Conclusion The Business Process Reengineering is the process of redesigning the business processes and the associated systems and organizational structures to achieve a dramatic change in the whole business process and performance. On the other hand, Kaizen is a small improvements and changes for a better for business process and performance. It must be accompanied by change of method. Business Process Reengineering is a â€Å"project† with a defined beginning and ending. Kaizen is a never ending process.

Annotated Bibliography on William Shakespeares “Hamlet” Essay

Ackerman Jr., Alan L. â€Å" Visualizing Hamlet’s Ghost: The Spirit of Modern Subjectivity.† Theatre Journal; March2001, Vol. 53 Issue 1, p119, 26p EBSCOhost. (5 February 2004) Other artists represent the dramatic structures, terms, images and characters from William Shakespeare’s Hamlet by portraying the exact emotion of the play. They act out a good representation of the spiritual experience in visual terms. The students vision studies and its importance in writings on aesthetics and representation. Adams, Joseph Quincy, â€Å"Arrival in London.† A Life of William Shakespeare. S.I: Houghton, 1923: 126-128. There were three classes of persons at the playhouse besides musicians. There were sharers, hirelings, and servants. The â€Å"sharers† were the most important actors. According to their merits, they enjoyed either half-sharers or whole-sharers as indicated by Hamlet. Below the sharers in rank were the â€Å"hirelings† who did not profit by large takings of the theatre. The third and final class, the servants, was the prompters, stagehands, property keepers, and caretakers. Chute, Marchette, â€Å"Hamlet.† Stories from Shakespeare. Cleveland: World, 1956: 157-160 Hamlet is perhaps one of the most famous of all of William Shakespeare’s tragedies. It is known all over the world and has kept a compelling fascination wherever it goes. The hero is so real and his dilemma is very basic to human living that people in every country recognize him. Hamlet is not only the most brilliant of the tragedies but one of the saddest. It is the saddest tragedy because the hero is not destroyed or killed by any evil in his nature but by kind misplaced good. Coleridge, Samuel Taylor, â€Å" Lectures and Notes on Shakespeare and other English Poets.† Online. Internet. Available: http://shakespearean.org.uk/haml-col.htm. (6 February 2004) Hamlet’s character is the prevalence of the abstracting and generalizing habit over the practical. He does not want courage, skill, will, or opportunity; but every incident sets him thinking; and it is curious, and at the same time strictly natural, that Hamlet, who all the play seems reason itself, should be impelled, at last, by mere accident, to effect his object. Lamb, Gregory M. â€Å"A sweet, gentle, inspired Hamlet.† Christian Science Monitor: 20 April 2001. (6 February 2004). T.S. Eliot called Hamlet the â€Å"Mona Lisa of Literature†. No matter how hard we look at the play, it never yields all its secrets. We have become fascinated by it. This being Shakespeare, a ripping good story unfolds, of course, from the moment a creepy ghost walks the castle’s parapet on through murders, suicide, and enough plot twist and complex relationships for any soap-opera fan. This is all topped with a dramatic sword fight. Hamlet is no Bruce Willis tale of an action hero on a payback mission. â€Å"Shakespeare† Britannica, 1989 During Shakespeare’s early career dramatists sold their play to an actor company, who then takes charge of them, prepared working prompt books, and did whatever it takes to make sure other companies did not take their work. This way they could exploit the play itself for as long as it drew an audience. Some plays did get published into smaller books called quartos. Hamlet quartos are a good example of plays that were pirated or bad text. â€Å"Shakespeare, William† The World Book Encyclopedia, 1979 Shakespeare wrote his greatest tragedies during the third period (1601-1608) of his artistic development. Of all the tragedy plays, Hamlet has to be the most dramatic and saddest of all the plays. The role of Hamlet in particular is considered one of the theater’s greatest acting challenges. Shakespeare focused the play on the deep conflict within the thoughtful and idealistic Hamlet as he is torn between the demands of his emotions and the hesitant skepticism of his mind. Thorndike, Ashley Horace. Shakespeare’s Theater. New York: The MacMillian Company, 1916:246-251. Records of court performance are abundant and descriptions of performances of traveling actors before noble or king may be found in Hamlet. The traditions and standards of acting accumulated by a generation of practice before an increasing audience. This made the play more exciting to watch every time it was portrayed.

Case 1.11worldcom

Question 1: The definition of assets is in FASB Concept Statement 6, paragraph 25: Assets are probable future economic benefits obtained or controlled by a particular entity as a result of past transactions or events.Paragraph 26 then describes the trio of characteristics that qualify an item as an asset: an asset has three essential characteristics: (a) it embodies a probable future benefit that involves a capacity, singly or in combination with other assets, to contribute directly or indirectly to future net cash inflows, (b) a particular entity can obtain the benefit and control others’ access to it, and (c) the transaction or other event giving rise to the entity’s right to or control of the benefit has already occurred.Question 2: The capitalized line costs were operating expenses and should not have been treated like a capital asset. On the one hand, one of WorldCom's major operating expenses was its so-called â€Å"line costs. † These were fees paid to thi rd party telecommunications network providers for the right to access the third parties' networks. Under GAAP (Generally Accepted Accounting Principles), these fees cannot be capitalized.They must be taken as immediate expenses and subtracted from income. On the other hand, the increased line cost lies in the long-term, fixed-rate leases for network capacity WorldCom initiated in order to meet the anticipated increase in customer demand. And as later the demand was not as expected, the Company has to pay for the leases that were substantially underutilized to avoid punitive termination provisions.The line costs that WorldCom capitalized were ongoing, operating expenses that accounting rules required WorldCom to recognize immediately. Instead of expense the cost currently, WorldCom capitalized it to exaggerate its pre-tax income. Future economic benefit is the essence of an asset. WorldCom capitalized excess capacity costs that were not generating revenue, which violates GAAP. Expens e or a loss would be recognized upon evidence that previously recognized asset benefits would not be realized.

Management strategic Term Paper Example | Topics and Well Written Essays - 500 words

Management strategic - Term Paper Example Retail coffee, European apparel, European nuts and snacks, U.S. meat snacks, European meats and Sara Lee branded apparel. Another significant decision taken parallel was to spin off the branded apparel business as Hanesbrands rather than selling it. This decision generated good cash flows for Sara Lee. After the retrenchment, Sara Lee Corporation took several strategic decisions to increase its sales and profits continuously. Quantitative goals were fixed for sales and profitability. For achieving these goals, the company decided to focus on three competitive capabilities. The first was to focus on customer needs and satisfaction. The second was to have appropriate category management to win new accounts or customers. The third was to focus on operational excellence through lean manufacturing and centralized purchasing. In addition to these capabilities, the company decided to develop a revised three division organizational structure according to customer types. These three divisions were Sara Lee food and beverage division, Sara lee Foodservice division and Sara Lee international division. This division was done in order to better realize the organizational

Report Proposal Essay Example | Topics and Well Written Essays - 1000 words

Report Proposal - Essay Example Employee engagement is a necessary tool for creating innovative, motivated, committed and high productive workers in Wal-Mart. Conversely, the Wal-Mart has adopted a lean strategy that has enabled it to enhance efficiency while minimising resource wastages, thus saving a significant amount of resources for the company. Currently, Wal-Mart operates approximately 8,900 outlets globally out of which 54% are located in America. In 2010, the firm reported revenues amounting to$ 408 billion, which was a 1% increase from the previous year. Arguably, Wal-Mart has been able to control the retail chain segment in the industry since it commands over 60% of revenues of the retail chain industry (Thomas, 2010). Wal-Mart is the preferred organisation for this study because of its long time success in the retail chain industry. The organisation recognises employee engagement as a crucial tool and mechanism for improving employee productivity and motivation. The organisation recognises employees as an imperative strategic resource through which it can deliver quality products to the customers and as a mechanism for achieving organisational goals and objectives. Thus, it is imperative to examine Wal-Mart in this study to find out how crucial employee engagement is to the organisations success. (Walker, 2012). Employee engagement and involvement is an emerging trend in the human resource department of organisations. It has become imperative that organisations should engage their organisations to ensure an organisation achieves its core objectives at the least cost possible. Wal-Mart over the years has invested heavily in its human resources through in-house training and engagement in key administration functions in which they are bestowed with immense responsibilities to enable them develop personally and gain self-drive in performing their assigned duties